Charnwood W650 Instruções de Operação descarregar pdf (Página 6)

ASSEMBLY INSTRUCTIONS

Tools Required.

10mm Spanner.

13mm Spanner.

4mm Hex Key.

5mm Hex Key.

6mm Hex Key.

8mm Hex Key.

Straight Edge.

Set Square.

Phillips Screwdriver.

Flat Bladed Screwdriver.

Unpacking the Machine.

After removing the top of the packing case remove all loose accessories and put to one

side for later use. Remove the two bolts securing the machine to the wooden base (fig 1)

using a 13mm spanner.

With assistance tilt the machine and remove all accessories from inside the machine

(fig 2). Remove the two metal plates from the base of the machine using an 8mm hex key

(fig 3)

With the machine tilted screw the four adjustable feet into place on all four corners on the

bottom of the machine (fig 4)

You are now ready with assistance to lift the machine off the wooden base.

Fig.1

Fig.2

Fig.3

Fig.4

Fig.3

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Charnwood W650 Instruções de Operação Página 6