Charnwood W650 Instruções de Operação descarregar pdf (Página 5)

While working

Wood must be hand fed uniformly and without jerking into the sawing tool, slightly more slowly when

processing hard wood or work pieces, which produce large amounts of dust. Never move the work piece

during a processing operation. Avoid uncomfortable working stances to reduce the risk of contacting the

rotating sawing tool. Do not bend over the rotating sawing tool. Remove debris from the machine table

only when the machine is off. Never use the machine table as a worktable while the sawing tool is rotat-

ing.

After working

Never leave the machine operating without supervision. Remain at the machine until the sawing tool has

come to a complete stop. Remove debris and clean the machine and surrounding area so that the

machine is ready to use the next time.

Machine maintenance

Unplug the mains cable before any mechanical or electrical work is per-formed or when the sawing tool

is changed. Regularly lubricate mechanical parts: threaded rods, gears, driving chains, hinges, sliding

parts,etc.

Grounding Instructions

Caution: This tool must be grounded while in use to protect the operator from electric shock.

In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric

current to reduce the risk of electric shock. This tool is equipped with an electric cord having an

equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet

that is properly installed and grounded in accordance with all local codes and ordinances.

Do not modify the plug provided. If it will not fit the outlet, have the proper outlet installed by a qualified

electrician.

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The

conductor, with insulation having an outer surface that is green with or without yellow stripes, is the

equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not

connect the equipment-grounding conductor to a live terminal.

Check with a qualified electrician or service personnel if the grounding instructions are not completely

understood, or if in doubt as to whether the tool is properly grounded. Use only three wire extension

cords that have three-prong grounding plugs and three-pole receptacles that accept the tool’s plug.

Repair or replace a damaged or worn cord immediately.

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Charnwood W650 Instruções de Operação Página 5