Charnwood W625 Instruções de Operação descarregar pdf (Página 5)

fig. 13

fig. 14

In fig 14 , the screw in the position of A and B

are tightened firmly . The end of the screw

must can be at the same level.

Except the position of H according to the

order from A to G tighten all the unmouted

screws.

Torn over the machine and make it

stand.then adjust the part 17 on the spare

part 16 to make the part 17 reach the ground

use screw to fix it.

fig. 15

fig. 16

Do not loosen screw Nut A and assemble the

part 18 .Adjust the position from it to the

blade according to the measure in the figure,

then tighten the screw Nut A.

7

Bring down the blade insert the part 19 then

use 4 pes M6X16 cross counter -sunk screw

to fix it,

Use M6X25 cross round-head screw > M6

lock screw Nut to assemble the 20 on the part

18.

Use the part 21 to connect the blowing-wind

hole in the part 20 and in the part 14 .Then

clip the part 21 on the part 7.

Use 2 pes M6X20, 2 pes M6 papilionaceous

screw nut to assemble the part 23 on the part

24.

1 2 3 4 5 6 7 8 9

Comentários a estes Manuais

Sem comentários