Charnwood W721 Instruções de Operação descarregar pdf (Página 13)

Lower the blade guard

Remove the rip fence carrier

Slide the blade off upper and

lower wheels, bringing it out of

the machine via the slots in the

rear frame and the blade guard.

Reverse these steps to fit the new blade. Ensure that the teeth are at the front and pointing

down.

Position the blade between the guide bearings and pins. Tension and adjust the tracking as

done during the initial set up. Check and adjust, if necessary, the position of the bearings

and the guide pins.

1 2 ... 8 9 10 11 12 13 14 15 16

Sem comentários

Charnwood W721 Instruções de Operação Página 13